日本www.在线中文字幕,谁有免费黄色网址,成人国产片视频在线观看

DIS-IP200日本思達扭力測試儀器

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

DIS-IP5日本思達扭力測試儀器

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

DIS-IP50日本思達扭力測試儀

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

DIS-IP5日本思達扭力測試儀

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

DIS-IPS20C日本思達扭力測試儀

Measurement of bolting machines

仠 TORQUE TESTER 丂DIS-IPS

Performance check of an electric driver Management of the bolting torque of an automatic line A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Detection part is very a compact! The best for measurement of an automatic line OW join. it rewinds atis needlessness. Disply screen became large. It is very legible .It became large 1.5times. Various attachments are attached. Measurement is possible,with a bit attached. The main features 仩 Yes-no decision丂仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂仩 USB terminal data output

DIS-IPS
Specification		DIS-IPS20C	DIS-IPS5C
Measuring range		0.20乣20 N 丂丂2.0乣200 kgf丒cm丂丂 2.0乣180 lbf丒in	0.020乣5 N?/span>m 0.20乣50 kgf丒cm 0.20乣45 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword.
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch-Zero Clearance		Easy Zero-Adjustment with pressing CLEAR button
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format (Baud rate : 19200)
	Data memory	800 data stored
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - about 3hours
Continunous working time		12 hours
Attachment fit mouth		仩20倣m丂
Meter outside type dimension		100乮W乯亊105乮D乯亊33乮俫乯
Weight		Meter part 520g
Attachment		Fixed Attachment丂仩20噊丂M4/M5/M6/M8
		OW joint丂OW-20	OW joint丂OW-10
Accessories (one piece each)		AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
		An inspection report, a proofreading certificate, a traceability system figure

OW joint is a measurement end at one-touch. It binds tightmeasurement is completed only by the work of a direction. Inversion operation like the former is unnecessary.Since the fit part with a bit is the screw head, where a bit is attached, it can be measured.By the conventional method, friction of a screw part had affected the measurement result.This joint has the structure where it is not influenced of fricative,can manage torque stabilized over the long period of time

DIS-IP200日本思達扭力測試儀器

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

DIS-IP5日本思達扭力測試儀器

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

DIS-IP500日本思達扭力測試儀

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

DIS-IP200日本思達扭力測試儀

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

DIS-IP500日本思達扭力測試儀

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗