DIS-IP200日本思達扭力測試儀
| Measurement of torque driver / torque wrench |
| 仠 TORQUE TESTER 丂DIS-IP series |
 |
| Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D). |
| Specification | DIS-IP05 | 俢IS-俬俹5 | 俢IS-俬俹50 | 俢IS-俬俹200 | 俢IS-俬俹500 | |
| Measuring range (at time of Track) | 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Accuracy | 亇0.5% (499 or less digit亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat (Baud rate :19200) | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||||
| Accessories (one piece each) | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 |  |
| 俙 | 兂40 | 兂50 | 兂60 | 兂80 | |
| 俛 | 41.2 | 63 | 73 | 99 | |
| 俠 | 5 | 10 | 10 | 15.5 | |
| 俢 | 兂60 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂50 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂4.2 | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 6.35倱倯 | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| weight | 189倗 | 632倗 | 1.8倠倗 | 3倠倗 | |
DIS-IP50日本思達扭力測試儀
| Measurement of torque driver / torque wrench |
| 仠 TORQUE TESTER 丂DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D). |
| Specification | DIS-IP05 | 俢IS-俬俹5 | 俢IS-俬俹50 | 俢IS-俬俹200 | 俢IS-俬俹500 | |
| Measuring range (at time of Track) | 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Accuracy | 亇0.5% (499 or less digit亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat (Baud rate :19200) | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||||
| Accessories (one piece each) | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| 俙 | 兂40 | 兂50 | 兂60 | 兂80 | |
| 俛 | 41.2 | 63 | 73 | 99 | |
| 俠 | 5 | 10 | 10 | 15.5 | |
| 俢 | 兂60 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂50 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂4.2 | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 6.35倱倯 | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| weight | 189倗 | 632倗 | 1.8倠倗 | 3倠倗 | |
DIS-IP5日本思達扭力測試儀
| Measurement of torque driver / torque wrench |
| 仠 TORQUE TESTER 丂DIS-IP series |
|
| Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D). |
| Specification | DIS-IP05 | 俢IS-俬俹5 | 俢IS-俬俹50 | 俢IS-俬俹200 | 俢IS-俬俹500 | |
| Measuring range (at time of Track) | 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Accuracy | 亇0.5% (499 or less digit亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat (Baud rate :19200) | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||||
| Accessories (one piece each) | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 | |
| 俙 | 兂40 | 兂50 | 兂60 | 兂80 | |
| 俛 | 41.2 | 63 | 73 | 99 | |
| 俠 | 5 | 10 | 10 | 15.5 | |
| 俢 | 兂60 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂50 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂4.2 | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 6.35倱倯 | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| weight | 189倗 | 632倗 | 1.8倠倗 | 3倠倗 | |
DIS-IPS20C日本思達扭力測試儀
| Measurement of bolting machines |
| 仠 TORQUE TESTER 丂DIS-IPS |
 |
| Performance check of an electric driver Management of the bolting torque of an automatic line A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. Detection part is very a compact! The best for measurement of an automatic line OW join. it rewinds atis needlessness. Disply screen became large. It is very legible .It became large 1.5times. Various attachments are attached. Measurement is possible,with a bit attached. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output |
| DIS-IPS | ||||
| Specification | DIS-IPS20C | DIS-IPS5C | ||
| Measuring range | 0.20乣20 N 丂丂2.0乣200 kgf丒cm丂丂 2.0乣180 lbf丒in | 0.020乣5 N?/span>m 0.20乣50 kgf丒cm 0.20乣45 lbf丒in | ||
| Accuracy | 亇0.5% (499 or less digit亇3digit) | |||
| Display | The 4 figures digital display of LCD | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measuring mode | P-P Peak | Peak load value hold. | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword. | |||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||
| Decision function | Setting of torque value | A maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| One-touch-Zero Clearance | Easy Zero-Adjustment with pressing CLEAR button | |||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||
| Data memory | 800 data stored | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh | |||
| Auto power save | 10 minutes no use, automatically switch off. | |||
| Charging time | From empty - about 3hours | |||
| Continunous working time | 12 hours | |||
| Attachment fit mouth | 仩20倣m丂 | |||
| Meter outside type dimension | 100乮W乯亊105乮D乯亊33乮俫乯 | |||
| Weight | Meter part 520g | |||
| Attachment | Fixed Attachment丂仩20噊丂M4/M5/M6/M8 | |||
| OW joint丂OW-20 | OW joint丂OW-10 | |||
| Accessories (one piece each) | AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | |||
| An inspection report, a proofreading certificate, a traceability system figure | ||||
 | OW joint is a measurement end at one-touch. It binds tightmeasurement is completed only by the work of a direction. Inversion operation like the former is unnecessary.Since the fit part with a bit is the screw head, where a bit is attached, it can be measured.By the conventional method, friction of a screw part had affected the measurement result.This joint has the structure where it is not influenced of fricative,can manage torque stabilized over the long period of time | |||
最新產品
- 4-(Trifluoromethoxy)aniline (Standard) 2025/9/26 16:55:02
- Tri(ethylene glycol) monoethyl ether 2025/9/26 16:54:38
- Acivicin (Standard) 2025/9/26 16:54:14
- Acivicin hydrochloride (Standard) 2025/9/26 16:53:50
- epi-Inositol (Standard) 2025/9/26 16:53:26
- Paraxanthine (Standard) 2025/9/26 16:53:02
- Isopropyl 4-hydroxybenzoate (Standard) 2025/9/26 16:52:38
- Ethyl (4-hydroxyphenyl)acetate 2025/9/26 16:52:14
- 4-Methoxybenzyl acetate-d3 2025/9/26 16:51:50
- 全自動一體化蒸餾儀 2025/9/26 16:46:44
- Fosfomycin sodium (Standard) 2025/9/26 16:51:26
- 6位一體化蒸餾儀 2025/9/26 16:46:36
- 智能一體化蒸餾儀 2025/9/26 16:46:29
- 多功能蒸餾器 2025/9/26 16:46:19
- 7-Methyluric acid 2025/9/26 16:51:01
- 一體化蒸餾儀 2025/9/26 16:46:10
- 多功能蒸餾儀 2025/9/26 16:45:54
- Ethyl 3,4-dihydroxybenzoate (Standard) 2025/9/26 16:50:37
- 2-Hydroxy-5-nitrobenzoic acid, 99% (Standard) 2025/9/26 16:50:13
- N-Benzylaniline-d2 2025/9/26 16:49:49
- Ethyl 2-chloronicotinate (Standard) 2025/9/26 16:49:25
- Methyl decanoate (Standard) 2025/9/26 16:49:00
- 2-Butyl-4-chloro-5-formylimidazole (Standard) 2025/9/26 16:48:36
- X-GlcNAc 2025/9/26 16:48:11
- Trimethyloctadecylammonium chloride 2025/9/26 16:47:47
- EFS1001大氣電場監測儀 雷電監測預警系統 2025/9/26 16:42:49
- 2’-Deoxyadenosine-5’-monophosphate-13C10,15N5 dilithium 2025/9/26 16:47:23
- 2’-Deoxyadenosine-5’-monophosphate-13C10 dilithium 2025/9/26 16:46:59
- 2’-Deoxyadenosine-5’-monophosphate-15N5 dilithium 2025/9/26 16:46:34
- 2’-Deoxyadenosine-5’-monophosphate-15N5,d12 dilithium 2025/9/26 16:46:10